Content
- System Requirements
- Download Software
- Virtual Machine Setup
- Guest Operating System Installation
- Check Internet Access
- Oracle Clusterware Installation Prerequisites. Part 1
- Install Guest Additions
- Oracle Clusterware Installation Prerequisites. Part 2
- Network Setup
- Downloaded Oracle Installation Files
- Clone the Virtual Machine
- Create Shared Disks
- Install the Grid Infrastructure
- Install the Database Software
- Install the Database
- Check the Status of the RAC
- Making Images of the RAC Database
- Restoring RAC from Saved Files
1. Install ASMLib:
# yum install oracleasm # yum install oracleasm-support
2. Configure ASMLib running this command and answering questions:
# oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: oinstall
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
Oracle Clusterware Installation Prerequisites. Part 2
Create the directory in which the Oracle software will be installed.
As root :
/usr/sbin/usermod -g oinstall -G dba oracle
Once execute the above command, confirm it through,
$id oracle
As root :
/usr/sbin/usermod -g oinstall -G dba oracle
Once execute the above command, confirm it through,
$id oracle
mkdir -p /ora/oracle/12/grid mkdir -p /ora/oracle chown -R oracle:oinstall /u01 chown oracle:oinstall /ora/oracle chmod -R 775 /ora/
Add oracle account to vboxsf groups. The vboxsf group was created by VirtualBox Guest Additions and will allow oracle user access folders in the Host OS:
# usermod -G dba,vboxsf oracle
Reset oracle user password to oracle:
# passwd oracle Changing password for user oracle. New password: BAD PASSWORD: it is based on a dictionary word BAD PASSWORD: is too simple Retype new password: passwd: all authentication tokens updated successfully. #
Disable secure linux by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.
SELINUX=disabled
Either configure NTP, or make sure it is not configured so the Oracle Cluster Time Synchronization Service (ctssd) can synchronize the times of the RAC nodes. In this case we will deconfigure NTP.
# service ntpd stop Shutting down ntpd: [FAILED] # chkconfig ntpd off # mv /etc/ntp.conf /etc/ntp.conf.orig # rm /var/run/ntpd.pid
Network Setup
Now we need to disable the firewall: Linux Main menu | System | Administration | Firewall. Click on "Disable" icon, then on "Apply".
Clone the Virtual Machine
Start either of the machines and log in as root. The current disks can be seen by issuing the following commands.
# ls /dev/sd* /dev/sda /dev/sda1 /dev/sda2 /dev/sdb #
Use the "fdisk" command to partition the new disk "sdb".
# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xd724aa83.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-391, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-391, default 391):
Using default value 391
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
#
The sequence of answers is "n", "p", "1", "Return", "Return" and "w".
Once the new disk is partitioned, the result can be seen by repeating the previous "ls" command.
# ls /dev/sd* /dev/sda /dev/sda1 /dev/sda2 /dev/sdb /dev/sdb1 #
If you decided earlier on ASMLib way of exposing shared disks to ASM then do "Create ASMLib Disk" section, otherwise do "Udev Configuration" below.
Create ASMLib Disk
Mark the new shared disk in the ASMLib as follows.
# oracleasm createdisk DISK1 /dev/sdb1 Writing disk header: done Instantiating disk: done #
Run the "scandisks" command to refresh the ASMLib disk configuration.
# oracleasm scandisks Reloading disk partitions: done Cleaning any stale ASM disks... Scanning system for ASM disks... #
We can see the disk is now visible to ASM using the "listdisks" command.
# oracleasm listdisksDISK1DISK2DISK3#
Start another VM and log in as root. Check that the shared disk is visible to ASM using the "listdisks" command.
DISK1# oracleasm listdisks
DISK2
DISK3
#
The virtual machines and shared disks are now configured for the grid infrastructure! Optionally, you can save this state using Simplified Way of Saving/Restoring Images. Please skip the next section "Udev Configuration".
[root@rac01 grid]# ./root.sh
Performing root user operation for Oracle 12c
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /ora/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /ora/grid/crs/install/crsconfig_params
2016/06/06 19:26:22 CLSRSC-363: User ignored prerequisites during installation
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
2016/06/06 19:27:26 CLSRSC-330: Adding Clusterware entries to file 'oracle-ohasd.conf'
CRS-4133: Oracle High Availability Services has been stopped.
CRS-4123: Oracle High Availability Services has been started.
CRS-4133: Oracle High Availability Services has been stopped.
CRS-4123: Oracle High Availability Services has been started.
CRS-2672: Attempting to start 'ora.evmd' on 'rac01'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac01'
CRS-2676: Start of 'ora.mdnsd' on 'rac01' succeeded
CRS-2676: Start of 'ora.evmd' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac01'
CRS-2676: Start of 'ora.gpnpd' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac01'
CRS-2672: Attempting to start 'ora.gipcd' on 'rac01'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac01' succeeded
CRS-2676: Start of 'ora.gipcd' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac01'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac01'
CRS-2676: Start of 'ora.diskmon' on 'rac01' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac01' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
CRS-2672: Attempting to start 'ora.storage' on 'rac01'
CRS-2676: Start of 'ora.storage' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac01'
CRS-2676: Start of 'ora.crsd' on 'rac01' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 3f32ae7d49bc4ff1bf251e25073ebf57.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
-- ----- ----------------- --------- ---------
1. ONLINE 3f32ae7d49bc4ff1bf251e25073ebf57 (ORCL:ASMDISK1) [DATA]
Located 1 voting disk(s).
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'rac01'
CRS-2673: Attempting to stop 'ora.crsd' on 'rac01'
CRS-2677: Stop of 'ora.crsd' on 'rac01' succeeded
CRS-2673: Attempting to stop 'ora.storage' on 'rac01'
CRS-2673: Attempting to stop 'ora.evmd' on 'rac01'
CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac01'
CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac01'
CRS-2677: Stop of 'ora.storage' on 'rac01' succeeded
CRS-2677: Stop of 'ora.gpnpd' on 'rac01' succeeded
CRS-2677: Stop of 'ora.mdnsd' on 'rac01' succeeded
CRS-2677: Stop of 'ora.evmd' on 'rac01' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 'rac01'
CRS-2673: Attempting to stop 'ora.asm' on 'rac01'
CRS-2677: Stop of 'ora.ctssd' on 'rac01' succeeded
CRS-2677: Stop of 'ora.asm' on 'rac01' succeeded
CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'rac01'
CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'rac01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'rac01'
CRS-2677: Stop of 'ora.cssd' on 'rac01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'rac01'
CRS-2677: Stop of 'ora.gipcd' on 'rac01' succeeded
CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'rac01' has completed
CRS-4133: Oracle High Availability Services has been stopped.
CRS-4123: Starting Oracle High Availability Services-managed resources
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac01'
CRS-2672: Attempting to start 'ora.evmd' on 'rac01'
CRS-2676: Start of 'ora.evmd' on 'rac01' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac01'
CRS-2676: Start of 'ora.gpnpd' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'rac01'
CRS-2676: Start of 'ora.gipcd' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac01'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac01'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac01'
CRS-2676: Start of 'ora.diskmon' on 'rac01' succeeded
CRS-2789: Cannot stop resource 'ora.diskmon' as it is not running on server 'rac01'
CRS-2676: Start of 'ora.cssd' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'rac01'
CRS-2672: Attempting to start 'ora.ctssd' on 'rac01'
CRS-2676: Start of 'ora.ctssd' on 'rac01' succeeded
CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'rac01'
CRS-2676: Start of 'ora.asm' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.storage' on 'rac01'
CRS-2676: Start of 'ora.storage' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'rac01'
CRS-2676: Start of 'ora.crsd' on 'rac01' succeeded
CRS-6023: Starting Oracle Cluster Ready Services-managed resources
CRS-6017: Processing resource auto-start for servers: rac01
CRS-6016: Resource auto-start has completed for server rac01
CRS-6024: Completed start of Oracle Cluster Ready Services-managed resources
CRS-4123: Oracle High Availability Services has been started.
2016/06/06 19:34:48 CLSRSC-343: Successfully started Oracle clusterware stack
CRS-2672: Attempting to start 'ora.asm' on 'rac01'
CRS-2676: Start of 'ora.asm' on 'rac01' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'rac01'
CRS-2676: Start of 'ora.DATA.dg' on 'rac01' succeeded
2016/06/06 19:37:09 CLSRSC-325: Configure Oracle Grid Infrastructure for a Cluster ... succeeded
[root@rac01 grid]#
[root@rac01 grid]#
Once SSH has configured, re-run the cluvfy output :
$cd /ora/oracle/app/oracle/product/12.1.0/dbhome_1/bin $cluvfy.sh stage -pre dbcfg -n rac1,rac2 -d /ora/oracle/app/oracle/product/12.1.0/dbhome_1 -verbose
[oracle@rac1 bin]$ ./crsctl stat res -t
-------------------------------------------------------------------------------- Name Target State Server State details
--------------------------------------------------------------------------------
Local Resources
--------------------------------------------------------------------------------
ora.DATA.dg
ONLINE ONLINE rac1 STABLE
ONLINE ONLINE rac2 STABLE
ora.LISTENER.lsnr
ONLINE ONLINE rac1 STABLE
ONLINE ONLINE rac2 STABLE
ora.asm
ONLINE ONLINE rac1 Started,STABLE
ONLINE ONLINE rac2 Started,STABLE
ora.net1.network
ONLINE ONLINE rac1 STABLE
ONLINE ONLINE rac2 STABLE
ora.ons
ONLINE ONLINE rac1 STABLE
ONLINE ONLINE rac2 STABLE
--------------------------------------------------------------------------------
Cluster Resources
--------------------------------------------------------------------------------
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE rac2 STABLE
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE rac1 STABLE
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE rac1 STABLE
ora.cvu
1 ONLINE ONLINE rac1 STABLE
ora.oc4j
1 OFFLINE OFFLINE STABLE
ora.rac1.vip
1 ONLINE ONLINE rac1 STABLE
ora.rac2.vip
1 ONLINE ONLINE rac2 STABLE
ora.racdb.db
1 ONLINE OFFLINE Instance Shutdown,ST
ABLE
ora.scan1.vip
1 ONLINE ONLINE rac2 STABLE
ora.scan2.vip
1 ONLINE ONLINE rac1 STABLE
ora.scan3.vip
1 ONLINE ONLINE rac1 STABLE
--------------------------------------------------------------------------------
[oracle@rac1 bin]$
[oracle@rac1 bin]$ ./cluvfy stage -pre dbcfg -n rac1,rac2 -d /ora/oracle/app/oracle/product/12.1.0/dbhome_1 -verbose
Performing pre-checks for database configuration
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
------------------------------------ ------------------------
rac1 yes
rac2 yes
Result: Node reachability check passed from node "rac1"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Status
------------------------------------ ------------------------
rac2 passed
rac1 passed
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
Node Name Status
------------------------------------ ------------------------
rac1 passed
rac2 passed
Verification of the hosts config file successful
Interface information for node "rac1"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
eth0 192.168.10.1 192.168.10.0 0.0.0.0 UNKNOWN 08:00:27:23:AD:3F 1500
eth0 169.254.134.21 169.254.0.0 0.0.0.0 UNKNOWN 08:00:27:23:AD:3F 1500
eth2 192.0.0.22 192.0.0.0 0.0.0.0 UNKNOWN 08:00:27:F9:4D:79 1500
eth2 192.0.0.26 192.0.0.0 0.0.0.0 UNKNOWN 08:00:27:F9:4D:79 1500
eth2 192.0.0.34 192.0.0.0 0.0.0.0 UNKNOWN 08:00:27:F9:4D:79 1500
eth2 192.0.0.36 192.0.0.0 0.0.0.0 UNKNOWN 08:00:27:F9:4D:79 1500
Interface information for node "rac2"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
eth0 192.168.10.2 192.168.10.0 0.0.0.0 UNKNOWN 08:00:27:23:AD:3F 1500
eth0 169.254.190.151 169.254.0.0 0.0.0.0 UNKNOWN 08:00:27:23:AD:3F 1500
eth2 192.0.0.23 192.0.0.0 0.0.0.0 UNKNOWN 08:00:27:F9:4D:79 1500
eth2 192.0.0.35 192.0.0.0 0.0.0.0 UNKNOWN 08:00:27:F9:4D:79 1500
eth2 192.0.0.29 192.0.0.0 0.0.0.0 UNKNOWN 08:00:27:F9:4D:79 1500
Check: Node connectivity using interfaces on subnet "192.0.0.0"
Check: Node connectivity of subnet "192.0.0.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
rac1[192.0.0.36] rac1[192.0.0.22] yes
rac1[192.0.0.36] rac2[192.0.0.23] yes
rac1[192.0.0.36] rac1[192.0.0.26] yes
rac1[192.0.0.36] rac1[192.0.0.34] yes
rac1[192.0.0.36] rac2[192.0.0.35] yes
rac1[192.0.0.36] rac2[192.0.0.29] yes
rac1[192.0.0.22] rac2[192.0.0.23] yes
rac1[192.0.0.22] rac1[192.0.0.26] yes
rac1[192.0.0.22] rac1[192.0.0.34] yes
rac1[192.0.0.22] rac2[192.0.0.35] yes
rac1[192.0.0.22] rac2[192.0.0.29] yes
rac2[192.0.0.23] rac1[192.0.0.26] yes
rac2[192.0.0.23] rac1[192.0.0.34] yes
rac2[192.0.0.23] rac2[192.0.0.35] yes
rac2[192.0.0.23] rac2[192.0.0.29] yes
rac1[192.0.0.26] rac1[192.0.0.34] yes
rac1[192.0.0.26] rac2[192.0.0.35] yes
rac1[192.0.0.26] rac2[192.0.0.29] yes
rac1[192.0.0.34] rac2[192.0.0.35] yes
rac1[192.0.0.34] rac2[192.0.0.29] yes
rac2[192.0.0.35] rac2[192.0.0.29] yes
Result: Node connectivity passed for subnet "192.0.0.0" with node(s) rac1,rac2
Check: TCP connectivity of subnet "192.0.0.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
rac1:192.0.0.36 rac1:192.0.0.22 passed
rac1:192.0.0.36 rac2:192.0.0.23 passed
rac1:192.0.0.36 rac1:192.0.0.26 passed
rac1:192.0.0.36 rac1:192.0.0.34 passed
rac1:192.0.0.36 rac2:192.0.0.35 passed
rac1:192.0.0.36 rac2:192.0.0.29 passed
Result: TCP connectivity check passed for subnet "192.0.0.0"
Check: Node connectivity using interfaces on subnet "192.168.10.0"
Check: Node connectivity of subnet "192.168.10.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
rac2[192.168.10.2] rac1[192.168.10.1] yes
Result: Node connectivity passed for subnet "192.168.10.0" with node(s) rac2,rac1
Check: TCP connectivity of subnet "192.168.10.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
rac2:192.168.10.2 rac1:192.168.10.1 passed
Result: TCP connectivity check passed for subnet "192.168.10.0"
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "192.168.10.0".
Subnet mask consistency check passed for subnet "192.0.0.0".
Subnet mask consistency check passed.
Result: Node connectivity check passed
Checking multicast communication...
Checking subnet "192.168.10.0" for multicast communication with multicast group "224.0.0.251"...
Check of subnet "192.168.10.0" for multicast communication with multicast group "224.0.0.251" passed.
Check of multicast communication passed.
Check: Group existence for "dba"
Node Name Status Comment
------------ ------------------------ ------------------------
rac2 passed exists
rac1 passed exists
Result: Group existence check passed for "dba"
Check: Total memory
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 2.1961GB (2302768.0KB) 1GB (1048576.0KB) passed
rac1 2.1961GB (2302768.0KB) 1GB (1048576.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 1.614GB (1692392.0KB) 50MB (51200.0KB) passed
rac1 1.4389GB (1508812.0KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 9.7656GB (1.0239992E7KB) 2.1961GB (2302768.0KB) passed
rac1 9.7656GB (1.0239992E7KB) 2.1961GB (2302768.0KB) passed
Result: Swap space check passed
Check: Free disk space for "rac2:/tmp"
Path Node Name Mount point Available Required Status
---------------- ------------ ------------ ------------ ------------ ------------
/tmp rac2 / 8.1064GB 1GB passed
Result: Free disk space check passed for "rac2:/tmp"
Check: Free disk space for "rac1:/tmp"
Path Node Name Mount point Available Required Status
---------------- ------------ ------------ ------------ ------------ ------------
/tmp rac1 / 8.1104GB 1GB passed
Result: Free disk space check passed for "rac1:/tmp"
Check: User existence for "oracle"
Node Name Status Comment
------------ ------------------------ ------------------------
rac2 passed exists(501)
rac1 passed exists(501)
Checking for multiple users with UID value 501
Result: Check for multiple users with UID value 501 passed
Result: User existence check passed for "oracle"
Check: Group existence for "oinstall"
Node Name Status Comment
------------ ------------------------ ------------------------
rac2 passed exists
rac1 passed exists
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
------------ ------------------------ ------------------------
rac2 passed exists
rac1 passed exists
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Status
---------------- ------------ ------------ ------------ ------------ ------------
rac2 yes yes yes yes passed
rac1 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Status
---------------- ------------ ------------ ------------ ----------------
rac2 yes yes yes passed
rac1 yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Status
------------ ------------------------ ------------------------ ----------
rac2 5 3,5 passed
rac1 5 3,5 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Status
---------------- ------------ ------------ ------------ ----------------
rac2 hard 65536 65536 passed
rac1 hard 65536 65536 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Status
---------------- ------------ ------------ ------------ ----------------
rac2 soft 4096 1024 passed
rac1 soft 4096 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Status
---------------- ------------ ------------ ------------ ----------------
rac2 hard 16384 16384 passed
rac1 hard 16384 16384 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Status
---------------- ------------ ------------ ------------ ----------------
rac2 soft 2047 2047 passed
rac1 soft 2047 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 x86_64 x86_64 passed
rac1 x86_64 x86_64 passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 2.6.32-100.28.5.el6.x86_64 2.6.32 passed
rac1 2.6.32-100.28.5.el6.x86_64 2.6.32 passed
Result: Kernel version check passed
Check: Kernel parameter for "semmsl"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 250 250 250 passed
rac2 250 250 250 passed
Result: Kernel parameter check passed for "semmsl"
Check: Kernel parameter for "semmns"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 32000 32000 32000 passed
rac2 32000 32000 32000 passed
Result: Kernel parameter check passed for "semmns"
Check: Kernel parameter for "semopm"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 100 100 100 passed
rac2 100 100 100 passed
Result: Kernel parameter check passed for "semopm"
Check: Kernel parameter for "semmni"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 128 128 128 passed
rac2 128 128 128 passed
Result: Kernel parameter check passed for "semmni"
Check: Kernel parameter for "shmmax"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 33554432 unknown 1179017216 failed Current value incorrect. Configured value unknown.
rac2 33554432 unknown 1179017216 failed Current value incorrect. Configured value unknown.
Result: Kernel parameter check failed for "shmmax"
Check: Kernel parameter for "shmmni"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 4096 4096 4096 passed
rac2 4096 4096 4096 passed
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmall"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 2097152 unknown 230276 failed (ignorable) Configured value unknown.
rac2 2097152 unknown 230276 failed (ignorable) Configured value unknown.
Result: Kernel parameter check passed for "shmall"
Check: Kernel parameter for "file-max"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 6815744 6815744 6815744 passed
rac2 6815744 6815744 6815744 passed
Result: Kernel parameter check passed for "file-max"
Check: Kernel parameter for "ip_local_port_range"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
rac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
Result: Kernel parameter check passed for "ip_local_port_range"
Check: Kernel parameter for "rmem_default"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 262144 262144 262144 passed
rac2 262144 262144 262144 passed
Result: Kernel parameter check passed for "rmem_default"
Check: Kernel parameter for "rmem_max"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 4194304 4194304 4194304 passed
rac2 4194304 4194304 4194304 passed
Result: Kernel parameter check passed for "rmem_max"
Check: Kernel parameter for "wmem_default"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 126976 unknown 262144 failed Current value incorrect. Configured value unknown.
rac2 126976 unknown 262144 failed Current value incorrect. Configured value unknown.
Result: Kernel parameter check failed for "wmem_default"
Check: Kernel parameter for "wmem_max"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 1048586 1048586 1048576 passed
rac2 1048586 1048586 1048576 passed
Result: Kernel parameter check passed for "wmem_max"
Check: Kernel parameter for "aio-max-nr"
Node Name Current Configured Required Status Comment
---------------- ------------ ------------ ------------ ------------ ------------
rac1 1048576 1048576 1048576 passed
rac2 1048576 1048576 1048576 passed
Result: Kernel parameter check passed for "aio-max-nr"
Check: Package existence for "binutils"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 binutils-2.20.51.0.2-5.11.el6 binutils-2.20.51.0.2 passed
rac1 binutils-2.20.51.0.2-5.11.el6 binutils-2.20.51.0.2 passed
Result: Package existence check passed for "binutils"
Check: Package existence for "compat-libcap1"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
rac1 compat-libcap1-1.10-1 compat-libcap1-1.10 passed
Result: Package existence check passed for "compat-libcap1"
Check: Package existence for "compat-libstdc++-33(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
rac1 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed
Result: Package existence check passed for "compat-libstdc++-33(x86_64)"
Check: Package existence for "libgcc(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 libgcc(x86_64)-4.4.4-13.el6 libgcc(x86_64)-4.4.4 passed
rac1 libgcc(x86_64)-4.4.4-13.el6 libgcc(x86_64)-4.4.4 passed
Result: Package existence check passed for "libgcc(x86_64)"
Check: Package existence for "libstdc++(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 libstdc++(x86_64)-4.4.4-13.el6 libstdc++(x86_64)-4.4.4 passed
rac1 libstdc++(x86_64)-4.4.4-13.el6 libstdc++(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++(x86_64)"
Check: Package existence for "libstdc++-devel(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 libstdc++-devel(x86_64)-4.4.4-13.el6 libstdc++-devel(x86_64)-4.4.4 passed
rac1 libstdc++-devel(x86_64)-4.4.4-13.el6 libstdc++-devel(x86_64)-4.4.4 passed
Result: Package existence check passed for "libstdc++-devel(x86_64)"
Check: Package existence for "sysstat"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 sysstat-9.0.4-11.el6 sysstat-9.0.4 passed
rac1 sysstat-9.0.4-11.el6 sysstat-9.0.4 passed
Result: Package existence check passed for "sysstat"
Check: Package existence for "gcc"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 gcc-4.4.4-13.el6 gcc-4.4.4 passed
rac1 gcc-4.4.4-13.el6 gcc-4.4.4 passed
Result: Package existence check passed for "gcc"
Check: Package existence for "gcc-c++"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 gcc-c++-4.4.4-13.el6 gcc-c++-4.4.4 passed
rac1 gcc-c++-4.4.4-13.el6 gcc-c++-4.4.4 passed
Result: Package existence check passed for "gcc-c++"
Check: Package existence for "ksh"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 missing ksh-... failed
rac1 missing ksh-... failed
Result: Package existence check failed for "ksh"
Check: Package existence for "make"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 make-3.81-19.el6 make-3.81 passed
rac1 make-3.81-19.el6 make-3.81 passed
Result: Package existence check passed for "make"
Check: Package existence for "glibc(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 glibc(x86_64)-2.12-1.7.el6 glibc(x86_64)-2.12 passed
rac1 glibc(x86_64)-2.12-1.7.el6 glibc(x86_64)-2.12 passed
Result: Package existence check passed for "glibc(x86_64)"
Check: Package existence for "glibc-devel(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 glibc-devel(x86_64)-2.12-1.7.el6 glibc-devel(x86_64)-2.12 passed
rac1 glibc-devel(x86_64)-2.12-1.7.el6 glibc-devel(x86_64)-2.12 passed
Result: Package existence check passed for "glibc-devel(x86_64)"
Check: Package existence for "libaio(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
rac1 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio(x86_64)"
Check: Package existence for "libaio-devel(x86_64)"
Node Name Available Required Status
------------ ------------------------ ------------------------ ----------
rac2 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
rac1 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed
Result: Package existence check passed for "libaio-devel(x86_64)"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
Result: Current group ID check passed
Starting check for consistency of primary group of root user
Node Name Status
------------------------------------ ------------------------
rac2 passed
rac1 passed
Check for consistency of root user's primary group passed
Checking CRS integrity...
Clusterware version consistency passed.
The Oracle Clusterware is healthy on node "rac1"
The Oracle Clusterware is healthy on node "rac2"
CRS integrity check passed
Checking node application existence...
Checking existence of VIP node application (required)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
rac1 yes yes passed
rac2 yes yes passed
VIP node application check passed
Checking existence of NETWORK node application (required)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
rac1 yes yes passed
rac2 yes yes passed
NETWORK node application check passed
Checking existence of ONS node application (optional)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
rac1 no yes passed
rac2 no yes passed
ONS node application check passed
Check: Time zone consistency
Result: Time zone consistency check passed
Pre-check for database configuration was unsuccessful on all the nodes.
[oracle@rac1 bin]$
No comments:
Post a Comment